Automatic transmissionAudi A6 C5. General information. User manual. What do they say about the variator on Audi? What box is on the audi a6 c7
AUDI A6 C7 C6 C5 GEAR REPAIR
MEKHANEAUDI A6 GEARBOX
installation replacement buy all modifications 1.8 1.9 2.0 2.3 2.4 2.5 2.6 2.7 2.8 3.0 3.1 4.2
repair and restoration of shafts argon welding of the manual transmission case
Moscow city
Artem 8 965 126 13 83 Vadim 8 925 675 78 75
Full diagnostics of the car during repair - for free!
With a high level of professionalism, extensive experience in the repair of mechanical transmissions, and our own spare parts warehouse, we carry out diagnostics, sale, replacement and repair of all types of manual transmissions for the AUDI A6 car. Repair of boxes begins with the primary, mandatory free diagnostics.
The cost of work during the repair of the gearbox AUDI A6:
A range of services for the repair of a manual gearbox AUDI A6:
- consultation by a repairman /by phone free of charge/
- delivery of a car for repair /within Moscow 3,000 rubles. From the Moscow region and other regions of the Russian Federation - by agreement/
- complex diagnostics of the car / determination of the presence of a malfunction of the engine, manual transmission, ABS, brake system; checking the electrical circuits of the car for corrosion, checking the kinematic destruction of the unit, checking the level transmission oil, checking the operability of the clutch hydraulic system / - free of charge during repairs
- visual inspection, hull integrity check
- checking the transmission oil content for steel, aluminum or bronze chips
- pallet opening /if necessary/
- removal from vehicle
- disassembly, washing of parts and assemblies
- Troubleshooting / the presence of the car owner is mandatory /
- coordination with the car owner of the cost of a complete repair and the date of completion of the repair
- receipt from the warehouse of spare parts / rem. kit, Supplies, knots/
- repair / argon welding / gearbox housing if necessary
- assembly
- clutch replacement /at the request of the car owner/
- car installation
- transmission oil filling
- output diagnostics and test run of the car
Warranty from 3 to 24 months or 60,000 km. run.
We have a fundremanufactured and used gearboxesAUDI A6 /see article replacement/. If the car owner wishes, we can replace the faulty one with the one taken from the exchange fund, which is often more economically feasible.
Prices for additional work
Spare parts for manual transmission repair:
- economy - from 3,000 to 8,000 rubles. /use, at the request of the car owner, only used parts to reduce the cost of repairs/
- business - from 8,000 to 28,000 rubles. /replace only directly damaged parts in the unit/
- representative - from 28,000 to 60,000 rubles. /replacement, regardless of damage, as a set: oil seals, bearings, needle bearings, synchronizers, stoppers, clutch hub locks - plus directly affected parts/
Own warehouse of spare parts necessary for the repair of mechanical transmissions. Bearings, oil seals, gears, synchronizers, gear couplings, shafts, differentials, manual transmission housings in stock and on order for all brands of cars.
.jpg)
The workshop for the repair of gearboxes is ready to perform the following work:
- Audi A6 gearbox replacement and repair
- replacement and repair manual transmission Audi A6
- AUDI A6 gearbox replacement and repair
- AUDI A6 gear oil change
- Audi A6 clutch replacement
- replacement release bearing AUDI A6
- replacement of the rear oil seal and crankshaft bearing AUDI A6
- replacement of the input shaft seal and drive seals AUDI A6
- replacement of the primary shaft manual transmission AUDI A6
- replacement of the secondary shaft manual transmission AUDI A6
- repair backstage gearbox AUDI A6
- repair (argon welding) of the body of the manual transmission AUDI A6
- repair of the secondary shaft of the gearbox AUDI A6
- replacement of the fifth gear manual transmission (without removing the gearbox from the car) AUDI A6
- repair of 1st and 2nd gear AUDI A6
- repair 3rd and 4th gear AUDI A6
- AUDI A6 5th gear repair
- buy gearbox AUDI A6
- buy manual transmission AUDI A6
- buy gearbox AUDI A6
Call us to schedule a manual transmission diagnostic and repair in a transmission repair shop. A preliminary appointment will allow you to find the most convenient solution, we are always ready to meet the wishes of the client.
In our specialized workshops for the repair of AUDI A6 manual gearboxes, high-quality maintenance, diagnostics and repair of all types of gearboxes are carried out. We offer an honest service for your repair. Your presence is mandatory at all stages of diagnostics and repair of the AUDI A6 gearbox; all work and accessories are coordinated. The term for the overhaul of the gearbox is from 0.5 to 1 working days (if the necessary parts are available).
We work seven days a week.
Works for us round the clock line advice on the repair of manual transmission gearboxes (8 965 126 13 83) and delivery for repair by tow truck (8 926 167 15 40). A tow truck during the repair of the manual transmission is provided for a fee (within the Moscow Ring Road - 3000, outside the Moscow Ring Road by agreement).
The cost of work during the overhaul of the AUDI A6 gearbox is 10,000 rubles (input and output diagnostics, removal and installation of the gearbox, disassembly and assembly, test drive weekend trip) + cost of components.
Input diagnostics is carried out with the obligatory presence of the owner of the car within 30-40 minutes after removing the gearbox from the car (inspection, disassembly of the manual transmission, washing the inner case of the gearbox from metal chips, disassembly of the shafts).
Removing the gearbox from the car, disassembling and troubleshooting takes place on the day of applying for repairs.
AUDI A6 manual transmission gearbox repair warranty from 1 to 12 months or 60,000 km (installed individually for each car - depending on the components during repair).
Audi A6 gearbox repair
Audi A6 - new sedan the fifth generation of German production, introduced in 2018. By design new model most reminiscent of the Audi A7 Sportback, the car is built on the same modular MLB Evo platform. The vehicle is equipped with the latest electronic systems: special radars, video cameras, infrared sensors provide almost complete automatic control. The machine received a wide range diesel engines and motors for gasoline with a wide power range: the maximum power of the gasoline engine is 340 hp, diesel - 204 hp. The updated car has excellent driving performance and fast acceleration.
Gearbox Features
The latest version of the sports sedan from Audi received several versions of the transmission: paired with gasoline engines an 8-speed hydromechanical is installed machine, diesel versions of engines work with a seven-speed dual clutch robot. Classic mechanics without electronic control for the latest generation of machines was not available, although it was provided to customers in previous generations.
In the previous restyled version of 2014, in addition to robotic checkpoint, installed 6-speed mechanical box gears. In Russia, mechanics are always in high demand, since this type of gearbox provides complete control of the car and at the same time is the cheapest. The installation of mechanics allows you to reduce fuel costs and not depend on capricious electronics - the car becomes more reliable and economical.
A prerequisite for long-term trouble-free operation of the manual transmission is proper maintenance, however, it is cheaper than for automatic and robotic transmissions oil change it is enough to carry out 1 time in 70 thousand kilometers, while a small amount of transmission fluid is sufficient.
Possible causes of gearbox problems
The mechanics are distinguished by maximum reliability. The duration of its use can reach 300 thousand kilometers and even more. This allows you to use the gearbox for the entire life of the car without major repairs. However, this is only possible with proper regular maintenance and following the recommended oil change intervals. Flushing allows you to free the gearbox from contamination and prevent possible malfunctions.
The following signs will indicate a malfunction of such a gearbox:
- Noticeable extraneous noise. Cracking, grinding, crunching occurs when there is not enough transmission fluid in the gearbox, as well as when parts are heavily worn due to increased friction. During diagnostics in the workshop, it is necessary to find the cause and quickly eliminate it.
- Problems with the inclusion of the desired speed mode. It becomes difficult to move the lever to the desired position, the problem arises due to the wear of the components of the shift mechanism.
- Grinding or crackling when trying to change gear. Often it indicates a clutch malfunction, wear of the mechanism is possible already during the first 100 thousand kilometers.
Professional repair in a workshop allows you to fully restore the functionality of the gearbox and return it to work. Take advantage of our professional service center Moscow.
What do we offer?
A specialized workshop carries out repair work with all types of gearboxes of German foreign cars. Mechanical repairs will cost cheap: all works are offered at affordable prices prices, it is also possible at a favorable price cost purchase a complete set of spare parts. At an affordable price for exchange offers new and boo spare parts can be purchased immediately without a long wait for an order.
At serious breakdowns recommended buy gearbox Audi A6 assembled at a low price. This will quickly solve the weight of the repair problem and guarantee. That the installed unit will work flawlessly for several years. A 2-year warranty is provided - it confirms the quality of the work performed.
To register the car for diagnostics and get additional necessary information, call the numbers indicated - the workshop employee will provide detailed advice on all issues.
The vehicle is equipped with a 5-speed automatic transmission electronic control. Switching to higher and lower stages is carried out automatically.
For reasons of fuel consumption and environmental protection, on some modifications the transmission is designed so that the maximum vehicle speed is reached only in the "S" position.
The gearbox is also equipped with a tiptronic system. This system gives the driver, if desired, the ability to manually change steps.
Switching to higher and lower forward gears is carried out automatically.
Starting off
- While holding down the lock button (on the control lever), move the control lever to the desired position, eg position D, and release the lock button.
- Wait until the automation switches on by creating a power circuit between the gearbox and the drive wheels (at the moment of switching on, a slight push is felt).
- Release the brake pedal and depress the accelerator pedal.
- Hold the vehicle with the brake pedal, for example at traffic lights.
- Do not press the accelerator pedal while doing this.
- Press and hold the brake pedal.
- Fully apply the handbrake.
- While holding down the lock button, move the control lever to position "P" and release the lock button.
When parking on level ground, it is enough to set the control lever to the "P" position. When the road is sloping, first tighten the parking brake to the stop and only then move the control lever to the "P" position. This reduces the load on the locking mechanism and makes it easier to pull the control lever out of the "P" position.
Attention.
- Do not press the accelerator pedal when shifting before driving off - risk of accident!
Lever positions
This section describes each control lever position.
The indication of the actual position of the control lever is accordingly displayed on the displays of the instrument cluster.
P - parking lock
In this position, the drive wheels are blocked mechanically. The parking lock may only be engaged when the vehicle is stationary.
To set the control lever to the "P" position and move it out of this position, press the lock button (on the control lever) and at the same time the brake pedal.
R - transmission reversing
When the control lever is placed in this position, reverse gear is engaged.
Reverse gear may only be engaged when the vehicle is stationary and the engine is running in idle move.
To set the control lever to the "R" position, press the lock button and the brake pedal at the same time. When the ignition is on and the control lever is in the "R" position, the reverse lights are on.
N - neutral position (idle position)
This position is the idle position.
D - basic position when moving forward
In this position, shifting to high and low forward gears is automatic, depending on engine load, speed and Dynamic Shift Program (DSP). To move the control lever from position "N" to position "D" at a speed of less than 5 km / h or a stationary vehicle, you must press the brake pedal.
To be able to manually adjust gear ratio driving conditions, under certain circumstances (for example, when driving in the mountains or with a trailer) it may be preferable to temporarily switch to a manual shift program.
S - sports position
Set the control lever to the "S" position when driving in sport mode. Later switching to higher stages allows full use of the engine power reserves.
To move the control lever from position "N" to position "S" at a speed of less than 5 km / h or a stationary vehicle, press the brake pedal.
Attention
- Never move the control lever to "R" or "P" while driving - risk of accident!
- Regardless of the selected driving mode (except for "P" and "N"), with the engine running, hold the car with a foot brake, since even in idle mode the kinematic connection of the engine with the wheels does not completely disappear - the car "creeps" When the car is stationary with the mode turned on Do not inadvertently add gas to the movement (for example, by hand in engine compartment). Otherwise, the vehicle will start moving immediately, possibly even with the parking brake fully applied - risk of accident!
- Before opening the hood and carrying out work with the engine running, move the control lever to the "P" position and apply the parking brake to the stop.
Note
- In case of inadvertent transfer while moving the control lever to the "N" position, before returning to the "D" or "S" mode, release the gas and wait for the rpm to drop to idle.
- For reasons of fuel consumption and environmental protection, on some modifications the transmission is designed so that the maximum vehicle speed is reached only in the "S" position.
Control lever lock
The locking of the control lever prevents inadvertent switching on of the range of motion and thus spontaneous movement of the vehicle from a standstill.
The blocking is canceled as follows:
- Turn on the ignition.
- Depress the brake pedal and hold down the lock button at the same time.
Automatic control lever lock
When the ignition is on, the control lever is locked in the "P" and "N" positions. To move it out of these positions, press the brake pedal. As a reminder to the driver, when the control lever is in the "P" and "N" positions, the following indication appears on the display:
"BEEM EINLEGEN EINER FAHRSTUFE IM STAND FUSSBREMSE BETATIGEN" (when you select the motion mode of a stationary vehicle, press the brake pedal).
In addition, the symbol gj for the automatic control lever lock will illuminate on the control lever yoke.
At speeds of approx. 5 km/h and above, the control lever lock is automatically released when the control lever is in the "N" position.
When the control lever is moved quickly through the "N" position (for example, from the "R" position to the "D" position), the control lever is not blocked. This will give, for example, the possibility of "jumping" a stuck car. If the control lever is in the "N" position for more than 1 second with the brake pedal released, it is blocked.
Lock button
The control lever lock button prevents the control lever from being accidentally moved to certain positions. Pressing this button releases the control lever. The figure highlights the positions at which it is necessary to press the lock button.
Key lock in the ignition
After switching off the ignition, the key can only be removed from the lock when the control lever is in position "P" (parking lock). After removing the key from the lock, the lever is locked in the "P" position.
Kick-down device
The Kick-down device allows you to realize maximum acceleration.
When the accelerator pedal is pressed sharply with the transition of the resistance point, the automation switches, depending on the speed and speed, to a lower stage. Switching to the next higher stage occurs immediately after reaching the maximum engine speed corresponding to this stage.
Attention. Remember that on slippery roads the drive wheels may spin when the kick-down device is activated - risk of skidding!
Dynamic Switching Program (DSP)
Control automatic transmission transmission is carried out electronically.
The automatic transmission is controlled electronically. Switching to higher and lower gears is carried out according to the motion programs stored in the memory.
With a restrained driving style, the automation selects an economical shift program.
With a temperamental driving style with sudden acceleration and frequent speed changes, using top speed or after a sharp press on the accelerator pedal (Kick-down), the automation works in the range of sports programs. Late transition to higher stages allows you to fully realize the power reserve of the engine. Downshifting is carried out at higher engine speeds.
The choice of the optimal traffic program for specific conditions is a continuous process. However, regardless of this, you can switch to a more sporty program by pressing the accelerator pedal sharply. In this case, the gearbox shifts to a lower gear corresponding to the actual speed of movement, allowing dynamic acceleration (for example, when overtaking) without the need to sharply depress the accelerator pedal to the stop. After switching back to the higher gear and with the corresponding driving mode, the operation according to the original program is restored.
The hill program controls gear selection on uphill and downhill runs. Thanks to this, it is not necessary to shift when driving uphill. Pressing the brake pedal while driving downhill switches to a lower gear. As a result, it is possible to brake with the engine without resorting to manual switching.
Tiptronic mode
The tiptronic system also gives the driver the option of shifting manually.
Switching to manual mode
- Press control lever out of position "D" to the right. When manual mode is engaged, "5 4 3 21" appears on the display, highlighting the gear currently engaged.
- When the control lever is moved forward (in the tiptronic position), it shifts to higher gears (+).
- When the control lever is moved back (in the tiptronic position), a downshift (-) occurs.
When accelerating in 1, 2, 3 and 4 stages, the gearbox will automatically switch to the next higher stage shortly before reaching the maximum engine speed.
When switching from a higher gear to a lower gear, the automatics will switch only after it becomes impossible to increase the engine speed by increments.
When the kick-down device is operated, the transmission shifts to the next lower gear depending on the speed and engine speed.
emergency program
In the event of a system malfunction, the automation switches to an emergency program.
In the event of a system malfunction, the automation switches to an emergency program. This is signaled by the ignition or extinction of all segments on the display panel at once.
In this case, the control lever can be moved to all positions. However, in the "D" and "S" positions, the 4th stage will turn on.
It is also possible to engage reverse gear "R". However, the electronic reverse gear lock is disabled during emergency operation.
In emergency mode, the manual switching program (tiptronic) is disabled.
When shifting the gearbox to emergency mode contact Audi as soon as possible and have the fault rectified.
Steering wheel "tiptronic"
Buttons located on the steering wheel give the driver the option of manual gear shifting as well.
Upshifting
- Press the top side of one of the keys (+).
- Press the bottom side of one of the keys (-).
Of course, manual gear shifting via the center console control lever is also possible.
Related Articles
